iSN-201 Series: Illuminance, Temperature and Humidity
Illuminance, Temperature and Humidity
iSN-201 Series ผลิตภัณฑ์สำหรับวัดแสงสว่าง, อุณหภูมิ, ความชื้น ภายในอาคาร รองรับรูปแบบในการเชื่อมต่อที่หลากหลาย สามารถเลือกใช้ได้ตามความต้องการเช่น RS485,Ethernet, Bluetooth, Wifi, รองรับหลายโปรโตคอลในการสื่อสารเช่น DCON, Modbus TCP/RTU ทำให้สามารถทำงานร่วมกับระบบควบคุมกลาง เช่น HMI,SCADA ได้อย่างลงตัว ตัวผลิตภัณฑ์มี DIP Switch, Rotary Switch ในการตั้งค่า อีกทั้งยังสามารถติดตั้ง, ดูแลรักษา, ซ่อมแซม ได้ง่ายอีกด้วย
Features
- Illuminance Measurement Range: 0 to 20,000 Lux
- Temperature Measurement Range: -20 to +60°C
- Humidity Measurement Range: 0 to 100% RH
- Supports the DCON and Modbus RTU/TCP Protocols
- Supports the MQTT Protocol for Ethernet Interface
- Includes RS-485/Ethernet Communication Interfaces
- Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC input
- Supports Web Confi guration and Firmware Update via Ethernet
- Compatible with IEEE802.11b/g/n standards (iSN-201-WF only)
- Support infrastructure and limit-AP modes for wireless networks (iSN-201-WF only)
- Ceiling Mounting
| Model | iSN-201-E | iSN-201-BLE | iSN-201-WF |
| Illuminance Measurement | |||
| Range | 0 to 20,000 Lux | ||
| Resolution | 1 Lux | ||
| Accuracy | ±5% | ||
| Temperature Measurement | |||
| Measurement Range | -40 to +120°C | ||
| Fire Alarm | 65°C (Programmable) | ||
| Resolution | 0.1°C | ||
| Accuracy | Typical: ±0.5°C; refer to figure 2 | ||
| Relative Humidity Measurement | |||
| Range | 0 to 100% RH | ||
| Resolution | 0.1% RH | ||
| Accuracy | Typical: ±3% RH @ 20 ~ 80% RH; refer to figure 1 | ||
| Relay Output | |||
| Channels | 1 | ||
| Type | Power Relay, Form C | ||
| Max. Load Current | NO: 10 A @ 250 VAC NC: 6 A @ 250 VAC | ||
| Load Wattage | Incandescent Bulb: 1500 W Max.; Fluorescent Lamp: 300 W Max. | ||
| Communication | |||
| Node Address | Hardware: 96 to 127 / Software: 1 to 255 | ||
| Protocol | DCON, Modbus RTU, Modbus TCP, MQTT | ||
| Wired Interface | Yes, RS-485 X 1 and Ethernet/PoE x1 | ||
| Wireless Interface | – | Bluetooth | Wi-Fi |
| Supported Standard | – | BT 4.0 | IEEE 802.11 b/g/n |
| Wireless Mode | – | Slave | Infrastructure/Limited AP |
| Wireless Security | – | AES 128 | WEP, WPA ,WPA2 |
| Transmission Range | – | 20 m (LOS) | 50 m (LOS) |
| LED Indicators | |||
| LED Indicators | Yes,1 as Power, 1 as Alarm Indicator. 1 as Communication Indicator. | ||
| EMS Protection | |||
| ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal, ±8 kV Air for Random Point | ||
| EFT (IEC 61000-4-4) | ±4 kV for Power Line | ||
| Power Requirements | |||
| Power Supply | 10 to 48 VDC, PoE | ||
| Reverse Polarity Protection | Yes | ||
| Power Consumption | 2 W | 2.3 W | 2.3 W |
| Mechanical | |||
| Installation | Ceiling/surface mounted | ||
| Protection Class | IP20 | ||
| Dimensions (D x H) | O 150 mm x 53 mm | ||
| Environment | |||
| Operating Temperature | 0 to +75°C | ||
| Storage Temperature | -30 to +80°C | ||
| Humidity | 10 to 90% RH, Non-condensing | ||