RUT200

RUT200

Teltonika RUT200 – Industial 4G router ที่ถอดแบบ Feature ของ model ยอดนิยม อย่าง RUT240 มาอย่างครบถ้วน ซึ่ง RUT200 รองรับ การใช้งานระดับมืออาชีพ ทนต่อการทำงานในพื่นที่ที่สภาพแวดล้อมเลวร้าย เช่น พื่นที่ที่มีอุณหภูมิสูงจัด หรือ ต่ำจัด ( -40 °C to 75 °C) ขนาดเล็ก กระทัดรัด ติดตั้งง่าย

NBTC

RUT 240 Ed 3

RUT200 Driragram

rut240 .newnew 01

ตัวอย่างการนำไปใช้งานในแต่ละ

Application

  • การนำไปใช้ในการทำงานร่วมกันกับอุปกรณ์ IoT เพื่อใช้รับ – ส่งข้อมูล และรายงานผล หรือต้องการนำไปใช้ในพื้นที่ที่แตกต่างจากสภาวะแวดล้อมทั่วไป เช่น อุณหภูมิที่เย็นจัด ความชื้นสูง หรือบริเวณที่มีความร้อนตลอดเวลา

Solar PV plants

ตัวกลางในการเชื่อมต่อ Solar plant เพื่อการตรวจสอบแบบเรียลไทม์โดยไม่ต้องเดินทางไปที่ไซต์ทำงานได้อย่างมีประสิทธิภาพแม้อยู่ในอากาศที่รุนแรง สามารถดูสถานะ และตั้งค่าแม้อยู่ในระยะไกลได้

Remote Camera Control

LTE router ประสิทธิภาพสูงสำหรับการสื่อสารเคลื่อนที่ สร้างการเข้าถึงได้จากระยะไกล สามารถดูภาพจากกล้องวงจรปิดเพื่อการตรวจสอบได้แบบเรียลไทม์

Wifi access in public transportation

สร้าง High Speed Wifi ผ่านเครือข่ายมือถือที่เชื่อถือได้รองรับผู้ใช้ได้หลายคน เป็นวิธีที่ใช้ง่ายและประหยัดในการให้บริการอินเทอร์เน็ตแบบไร้สายแบบเคลื่อนที่

Specifications

MOBILE
Mobile module4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Black/White listOperator black/white list
Band managementBand lock, Used band status display
APNAuto APN
BridgeDirect connection (bridge) between mobile ISP and device on LAN
PassthroughRouter assigns its mobile WAN IP address to another device on LAN
Multiple PDN (optional)Possibility to use different PDNs for multiple network access and services (not available in standard FW)
WIRELESS
Wireless modeIEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi securityWPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSIDSSID stealth mode and access control based on MAC address
WiFi usersUp to 50 simultaneous connections
Wireless HotspotCaptive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET
WAN1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
NETWORK
RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forward, traffic rules, custom rules
DHCPStatic and dynamic IP allocation, DHCP Relay, Relayd
QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNSSupported >25 service providers, others can be configured manually
Network backupVRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Load balancingBalance your internet traffic over multiple WAN connections
SSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)
SECURITY
AuthenticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLANPort and tag based VLAN separation
Mobile quota controlSet up custom data limits for the SIM card
WEB filterBlacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPNMultiple clients and server can be running simultaneously, 12 encryption methods
OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsecIKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/Server services can run simultaneously
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs’ code
SSTPSSTP client instance support
ZeroTierZeroTier VPN
WireGuardWireGuard VPN client and server support
MODBUS
MODBUS TCP SLAVE
ID filteringRespond to one ID in range [1;255] or any
Allow Remote AccessAllow access through WAN
Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
MODBUS TCP MASTER
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MODBUS DATA TO SERVER
ProtocolHTTP(S), MQTT, Azure MQTT
MQTT GATEWAY
MQTT gatewayAllows sending commands and receiving data from MODBUS Master through MQTT broker
MONITORING & MANAGEMENT
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTAFirmware update from sever, automatic notification
SSHSSH (v1, v2)
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
CallReboot, Status, WiFi on/off, Mobile data on/off, Output on/off
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP trap
JSON-RPCManagement API over HTTP/HTTPS
MODBUSMODBUS TCP status/control
RMSTeltonika Remote Management System (RMS)
IoT PLATFORMS
Cloud of ThingsAllows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorxAllows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
CumulocityAllows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT HubCan send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
SYSTEM CHARACTERISTICS
CPUMediatek MIPS 24Kc 580 MHz
RAM128 MB, DDR2
FLASH storage16 MB, SPI Flash
FIRMWARE / CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTAUpdate FW/configuration from server
RMSUpdate FW/configuration for multiple devices
Keep settingsUpdate FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating systemRutOS (OpenWrt based Linux OS)
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with built environment provided
INPUT/OUTPUT
Input1 x Digital input, 0 – 5 V detected as logic low, 8 – 30 V detected as logic high
Output1 x Digital open collector output, max output 30 V, 300 mA
EventsSMS, EMAIL, RMS
POWER
Connector4 pin industrial DC power socket
Input voltage range9 – 30 VDC, reverse polarity protection, surge protection >33 VDC 10us max
PoE (passive)Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt
Power consumption< 6.5 W Max
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet2 x RJ45 ports, 10/100 Mbps
I/O’s1 x Digital Input, 1 x Digital Output on 4 pin power connector
Status LEDs3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
SIM1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
Power1 x 4 pin DC connector
Antennas2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors
ResetReboot/Factory reset button
PHYSICAL SPECIFICATION
Casing materialAluminium housing with DIN rail mounting option, plastic panels
Dimensions (W x H x D)83 x 25 x 74 mm
Weight125 g
Mounting optionsBottom and sideways DIN rail mounting slots
OPERATING ENVIRONMENT
Operating temperature-40 °C to 75 °C
Operating humidity10% to 90% non-condensing
Ingress Protection RatingIP30
REGULATORY & TYPE APPROVALS
RegulatoryCB
SAFETY
StandardsIEC 62368-1:2018 (CB Scheme)