Menu
Accessory
อุปกรณ์เพิ่มความสามารถ
และประสิทธิภาพในการทำงานของระบบเครือข่าย Ethernet ในระดับอุตสาหกรรม ประสิทธิภาพสูง
ICPDAS Accessory
- SFP-1G85M-SX Multi-mode 850 nm, 0.5 km SFP module
- SFP-1G13M-SX2 Multi-mode 1310 nm, 2 km SFP module
- SFP-1G13S-LX Single-mode 1310 nm, 10 km SFP module
- SFP-1G13S-LX20 Single-mode 1310 nm, 20 km SFP module
- SFP-1G13S-LHX Single-mode 1310 nm, 40 km SFP module
- SFP-1G15S-XD Single-mode 1550 nm, 60 km SFP module
PoE Injector
tNS-200IN / tNS-200IN-24V คือ 1Port PoE Injector แบบ Fast Ethernet รองรับ 10/100Base-T(X)
tNS-200GIN / tNS-200GIN-24V คือ 1Port PoE Injector แบบ Gigabit Ethernet รองรับ 10/100/1000Base-T(X)
Features
- Auto-detection of PD (powered devices)
- Over-temperature, over-current and over/under-voltage detection
- No user settings
- Power Sourcing Equipment (PSE) operation
- tNS-200IN series supplies up to 15.4W
- tNS-200GIN series supplies up to 30W
- Tiny packaging fi ts on your DIN-Rail Mounting
- Cost-effective for tNS-200IN/tNS-200GIN series
System Specifications
| Models | tNS-200IN | tNS-200IN-24V | tNS-200GIN | tNS-200GIN-24V |
| Interface | ||||
| RJ45 ports | 1 for Ethernet in, 1 for PoE out, 10/100 BaseT(X) | 1 for Ethernet in, 1 for PoE out, 10/100/1000 BaseT(X) | ||
| LED Indicators | Power, Power Device is detected | |||
| Power Input | ||||
| Input Voltage Range | +46 ~ +53 VDC | +18 ~ +32 VDC | +46 ~ +53 VDC | +18 ~ +32 VDC |
| Power Consumption | 0.4 A@ 48 VDC with PD full loading | 0.8 A@ 24 VDC with PD full loading | 0.7 A@ 48 VDC with PD full loading | 1.5 A@ 24 VDC with PD full loading |
| Protection | Power reverse polarity protection | |||
| Frame Ground for EMS Protection | Yes | |||
| Connector | 4-Pin Removable Terminal Block | |||
| PoE Technology | ||||
| PoE Compliance | 100% IEEE 802.3af compliant | |||
| PoE Classification | PSE (Power Sourcing Equipment) | |||
| PoE Voltage | +48 VDC depending on power input | |||
| PoE Power | Up to 15.4 W | Up to 30 W | ||
| PoE Operation | Automatic detection and power management | |||
| PoE Pin assignments | V+ (Pin 4,5), V- (Pin 7,8) | |||
| PoE disconnect mode | DC disconnect | |||
| Mechanical | ||||
| Casing | Plastic (Flammability UL 94V-0) | |||
| Dimensions (W x L x H) | 52 mm x 27 mm x 86 mm | |||
| Installation | DIN-Rail Mounting | |||
| Environmental | ||||
| Operating Temperature | -40 °C ~ +75 °C | |||
| Storage Temperature | -40 °C ~ +85 °C | |||
| Ambient Relative Humidity | 10 ~ 90% RH, non-condensing | |||
PoE Splitter
NS-200PS คือ PoE Splitter โดยการรับ Inptu PoE แปลงเป็น Output 10W@24VDC และ Gigabit Ethernet 10/100/1000Base-T(X)
Features
- Supports 10/100/1000 Base-TX for PoE in and Data out
- IEEE 802.3af compliant split power/data from PoE equipment
- Power isolation and short circuit protection for power output
- Supports output power up to 10 W at 24 VDC
- Slim packaging fits on your DIN-Rail Mounting
- Supports operating temperatures from -40 °C ~ +75 °C
| Technology | |
| Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) |
| PoE Input | |
| IEEE 802.3af PoE Operation | Powered Device (PD) |
| PoE Power Input Range | +46 VDC ~ +54 VDC |
| PoE Power Input | Automatic detection and classification (power is accepted on either the signal or unused pairs) |
| Power Output | |
| Voltage Output | 24 VDC, 0.42 Amps |
| Power Output | 10 watts |
| Cable Length | |
| The specified maximum length of cable allowed between the PoE Switch and Ethernet device should be 100 meters or approximately 300 feet. The NS-200PS is not a repeater and does not amplify the Ethernet data signal. | |
| Mechanical | |
| Casing | Plastic (Flammability UL 94V-0) |
| Dimensions (W x L x H) | 33 mm x 78 mm x 107 mm |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -40 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |
Ordering Information
| NS-200PS CR | Industrial PoE Splitter (RoHS) |