Menu
With POE Type
View All Products
NSM-205GP
Features
unmanaged gigabit switch 4LAN+POE พอร์ต และ TP/SFP Combo พอร์ต รองรับ 10/100/1000 Base-T มาพร้อมกับฟีเจอร์ 10/100/1000M Auto และ ฟังก์ชั่น Auto MDI/MDI-X
unmanaged gigabit switch 4LAN+POE พอร์ต และ TP/SFP Combo พอร์ต รองรับ 10/100/1000 Base-T มาพร้อมกับฟีเจอร์ 10/100/1000M Auto และ ฟังก์ชั่น Auto MDI/MDI-X
- Full Gigabit Ethernet ports
- 4 PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
- 24/48 VDC flexible redundant power inputs
- Supports 10 KB jumbo frames
- Pluggable SFP transceiver port
- Supports Auto Negotiation and Auto MDI/MDI-X
- Supports Dual +18 ~ 55 VDC power input and 1 relay output
- Supports operating temperatures from –40 ~ +75°C
- DIN-Rail Mounting, Wall Mounting (optional)
Specifications
| Technology | |
| Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity |
| Processing Type | Store & forward, wire speed switching |
| MAC Addresses | 8K |
| Memory Bandwidth | 10 Gbps |
| Frame buffer memory | 1 Mbit |
| Jumbo Frames | 10K for Speed 1000M |
| Flow Control | IEEE802.3x flow control, back pressure flow control |
| Interface | |
| RJ-45 Ports | 10/100/1000 BaseT(X), 10/100BaseT(X) auto negotiation speed, full/half duplex mode, and auto MDI/MDI-X connection |
| Fiber Port | 1000BaseSFP slot/100BaseSFP slot |
| LED Indicators | PWR1, PWR2, Power fail, 10/100M, 1000M, Link/Act, Power Device is detected |
| Ethernet Isolation | 1500 Vrms 1 minute |
| DIP Switch | 100BaseSFP/1000BaseSFP and PoE/PoE+ setting |
| Power Input | |
| Redundant Input Range | Flexible input +24/+48 VDC Nominal. ( +18 ~ +55 VDC) |
| Power Consumption | 0.13@ 48 VDC without PD loading; 3.1 A @ 48 VDC with PD full loading (30 W per ports) 0.25@ 24 VDC without PD loading; 6.2 A @ 24 VDC with PD full loading (30 W per ports) |
| Alarm Contact | One relay output with current carrying capacity of 1A @ 30 VDC |
| Protection | Power reverse polarity protection |
| Connector | 6-Pin Removable Terminal Block (Power & Relay) |
| Mechanical | |
| Chassis | Metal with an IP30 ingress protection rating |
| Dimensions (W x L x H) | 28 mm x 160 mm x 122 mm |
| Installation | DIN-Rail or Wall Mounting (with optional kit) |
| Environment | |
| Operating Temperature | -40 °C ~ + 75 °C ( -40° F to 167° F ) |
| Storage Temperature | -40 °C ~ + 85 °C (-40 F to 185° F) |
| Ambient Relative Humidity | 10 ~ 90% RH, non-condensing |
NSM-205GP
Features
- Automatic MDI/MDI-X crossover for plug-and-play
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Supports operating temperatures from -40 °C ~ +75 °C
- Each port supports both 10/100 Mbps speed auto negotiation
- Power Inputs +46 VDC ~ +55 VDC
- Store-and-forward architecture
- IEEE 802.3af compliant PoE ports
- Slim packaging fits on your DIN-Rail Mounting
Specifications
| Models | NS-105PSE | NS-205PSE |
| Technology | ||
| Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) | |
| Processing Type | Store & forward; wire speed switching | |
| MAC Addresses | 2048 | |
| Frame Buffer Memory | 768 Kbit | |
| Flow Control | IEEE 802.3x flow control, back pressure flow control | |
| Interface | ||
| RJ-45 Ports | 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection | |
| LED Indica | Power, Link/Act , 10/100M, Power Device is detected | |
| Ethernet Isolation | 1500 Vrms 1 minute | |
| EMS Protection | Yes | |
| Power Input | ||
| Input Voltage Range | +46 VDC ~ +55 VDC | |
| Power Consumption | 0.05 A @ 48 VDC without PD loading 1.45 A @ 48 VDC with PD full loading | |
| Protection | Power reverse polarity protection | |
| EMS Protection | Yes | |
| Connector | 5-Pin Removable Terminal Block | 3-Pin Removable Terminal Block |
| PoE Technology | ||
| PoE Compliance | 100% IEEE 802.3af compliant | |
| PoE Classification | PSE (Power Sourcing Equipment) | |
| PoE Power | Up to 15.4 watts per channel | |
| PoE Operation | Automatic detection and power management | |
| PoE Pin Assignments | V+ (Pin 1, 2), V- (Pin 3, 6) | |
| PoE Disconnect Mode | DC disconnect | |
| Mechanical | ||
| Casing | Plastic (Flammability UL 94V-0) | |
| Dimensions (W x L x H) | 76 mm x 38 mm x 118 mm | 33 mm x 78 mm x 107 mm |
| Installation | DIN-Rail Mounting | |
| Environment | ||
| Operating Temperature | -40 °C ~ +75 °C | |
| Storage Temperature | -40 °C ~ +85 °C | |
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing | |
NS-205PSE-24V / NSM-205PSE-24V / NSM-208PSE-24V
NS-205PSE-24V / NSM-205PSE-24V คือ unmanaged switch POE 5 พอร์ต ประกอบด้วย 4 พอร์ตPOE และ 1 พอร์ตLAN รองรับ 10/100 base-TX มาพร้อมกับฟีเจอร์ 10/100M Auto และ ฟังก์ชั่น Auto MDI/MDI-X โดยสามารถรับไฟจากแหล่งจ่ายไฟ +24Vdc ได้
NSM-208PSE-24V คือ unmanaged switch POE 8 พอร์ตPOE รองรับ 10/100 base-TX มาพร้อมกับฟีเจอร์ 10/100M Auto และ ฟังก์ชั่น Auto MDI/MDI-X โดยสามารถรับไฟจากแหล่งจ่ายไฟ +24Vdc ได้
Features
- Automatic MDI/MDI-X crossover for plug-and-play
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Supports operating temperatures from -40 °C ~ +75 °C
- Each port supports both 10/100 Mbps speed auto negotiation
- Power Inputs +18 VDC ~ +32 VDC For NS-205PSE-24V/NSM-205PSE
- Power Inputs +18 VDC ~ +55 VDC For NSM-208PSE-24V
- Store-and-forward architecture
- 3.2 Gbps high performance memory bandwidth
- IEEE 802.3af compliant PoE ports
- DIN-Rail Mounting
Specifications
| Models | NS-205PSE-24V | NSM-205PSE-24V | NSM-208PSE-24V |
| Technology | |||
| Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) | ||
| Processing Type | Store & forward; wire speed switching | ||
| MAC Addresses | 1024 | ||
| Memory Bandwidth | 3.2 Gbps | ||
| Frame Buffer Memory | 512 Kbit | ||
| Flow Control | IEEE 802.3x flow control, back pressure flow control | ||
| Interface | |||
| RJ-45 Ports | 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection | ||
| LED Indicators | Power, Link/Act, 10/100M, Power Device is detected | ||
| Ethernet Isolation | 1500 Vrms 1 minute | ||
| EMS Protection | Yes | ||
| Power Input | |||
| Input Voltage Range | +18 VDC ~ +32 VDC | +18 VDC ~ +55 VDC | |
| Power Consumption | 0.24 A @ 24 VDC without PD loading 3.2 A @ 24 VDC with PD full loading | 0.28 A @ 24 VDC without PD loading 6.1 A @ 24 VDC with PD full loading | |
| Protection | Power reverse polarity protection | ||
| EMS Protection | Yes | ||
| Connection | 3-Pin Removable Terminal Block | 6-Pin Removable Terminal Block | |
| PoE Technology | |||
| PoE Compliance | 100% IEEE 802.3af compliant | ||
| PoE Classification | PSE (Power Sourcing Equipment) | ||
| PoE Power | Up to 15.4 watts per channel | ||
| PoE Operation | Automatic detection and power management | ||
| PoE Pin Assignments | V+ (Pin 1, 2), V- (Pin 3, 6) | ||
| Mechanical | |||
| Casing | Plastic (Flammability UL 94V-0) | Metal (IP30 Protection) | |
| Dimensions (W x L x H) | 31 mm x 113 mm x 157 mm | 25 mm x 119 mm x 168 mm | 28 mm x 120 mm x 160 mm |
| Installation | DIN-Rail Mounting | ||
| Environment | |||
| Operating Temperature | -40 °C ~ +75 °C | ||
| Storage Temperature | -40 °C ~ +85 °C | ||
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing | ||
NSM-206PSE / NSM-206PF
NSM-206PSE คือ unmanaged switch POE 6 พอร์ต ประกอบด้วย 4 พอร์ตPOE และ 2 พอร์ตLAN รองรับ 10/100 base-TX มาพร้อมกับ ฟังก์ชั่น Auto MDI/MDI-X สามารถจ่ายไฟได้สูงสุด 30W ต่อพอร์ต
NSM-206PF Serie คือ unmanaged switch POE 6 พอร์ต ประกอบด้วย 4 พอร์ต POE และ 2 พอร์ตไฟเบอร์ รองรับ 10/100 base-TX มาพร้อมกับ ฟังก์ชั่น Auto MDI/MDI-X สามารถจ่ายไฟได้สูงสุด 30W ต่อพอร์ต
Features
- 4 PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
- Up to 30 watts per PoE port
- Supports operating temperatures from -40 °C ~ +75 °C
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Power input 12~57 VDC wide range redundant power inputs
- Broadcast Storm protection
- Automatic MDI/MDI-X crossover for plug-and-play
- DIN-Rail Mounting, Wall Mounting (optional)
Specifications
| Models | NSM-206PSE | NSM-206PFT | NSM-206PFC | NSM-206PFCS | |
| Technology | |||||
| Standards | IEEE 802.3 for 10 Base-T IEEE 802.3u for 100 Base-TX IEEE 802.3x for Flow Control, Back Pressure Flow Control IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity | ||||
| Processing Type | Store & forward; wire speed switching | ||||
| MAC Addresses | 2048 | ||||
| Frame Buffer Memory | 768 Kbit | ||||
| Interface | |||||
| RJ-45 Ports | 6 x 10/100 Base-TX | 4 x 10/100 Base-TX | |||
| POE Pinout | V+ (pin 1, 2), V-(pin 3, 6) for Port1 ~ Port4 | ||||
| Fiber Ports | – | 2 Port 100 Base-FX (SC/ST connector) | |||
| LED Indicators | PWR1, PWR2, POE, Link/Act and Speed | ||||
| Ethernet Isolation | 1500 Vrms 1 minute | ||||
| Fiber Interface (100 Base-FX; SC/ST type) | |||||
| Multi-Mode | NSM-206PFT NSM-206PFC | Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm Distance: 2 km, (62.5/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -20 dBm Max. TX Output: -14 dBm Max. RX Sensitivity: -32 dBm Min. RX Overload: -8 dBm Budget: 12 dBm | |||
| Single-Mode | NSM-206PFCS | Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm Distance: 30 km, (9/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -15 dBm Max. TX Output: -8 dBm Max. RX Sensitivity: -34 dBm Min. RX Overload: -5 dBm Budget: 19 dBm | |||
| Power | |||||
| Input Voltage Range | 12 ~ 57 VDC Redundant dual Input | ||||
| Power Consumption | 0.15 A @ 24 VDC without PD loading, 5.8A @ 24VDC with PD full loading (30W per ports) 0.10 A @ 48 VDCwithout PD loading, 2.9A @ 48VDC with PD full loading (30W per ports) | ||||
| Power reverse polarity protection | Yes | ||||
| Connector | 4-Pin Removable Terminal Block | ||||
| Mechanical | |||||
| Casing | Metal | ||||
| Dimensions (W x L x H) | 28 mm x 150 mm x 119 mm | ||||
| Installation | DIN-Rail, wall mounting (optional) | ||||
| Environment | |||||
| Operating Temperature | -40 °C ~ +75 °C | ||||
| Storage Temperature | -40 °C ~ +85 °C | ||||
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing | ||||
NS-208PSE / NSM-208PSE, NS-208PSE-4/NSM-208PSE-4
Features
NS-208PSE/NSM-208PSE คือ unmanaged switch POE 8 พอร์ต ทุกพอร์ตเป็นPOE รองรับ 10/100 base-TX มาพร้อมกับฟังก์ชั่น Auto MDI/MDI-X สามารถจ่ายไฟได้สูงสุด 15.4w ต่อพอร์ต
NS-208PSE-4/NSM-208PSE-4 คือ unmanaged switch POE 8 พอร์ต แบ่งเป็น 4 พอร์ต POE และ 4 พอร์ต LAN รองรับ 10/100 base-TX มาพร้อมกับฟังก์ชั่น Auto MDI/MDI-X สามารถจ่ายไฟได้สูงสุด 15.4w ต่อพอร์ต
- Each port supports both 10/100 Mbps speed auto negotiation
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Auto-detection of PD (powered devices) and automatic power management
- Over-temperature, over-current and over/under-voltage detection
- Supports operating temperatures from -40 °C ~ +75 °C
- Automatic MDI/MDI-X crossover for plug-and-play
- Store-and-forward architecture
- 8 PoE ports for NS-208PSE/NSM-208PSE;
4 PoE ports for NS-208PSE-4/NSM-208PSE-4 - Supports +46 ~ +55 VDC power input
- DIN-Rail Mounting
Specifications
| Models | NS-208PSE | NSM-208PSE | NS-208PSE-4 | NSM-208PSE-4 |
| Technology | ||||
| Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) | |||
| Processing Type | Store & forward; wire speed switching | |||
| MAC Addresses | 1024 | |||
| Memory Bandwidth | 3.2 Gbps | |||
| Frame Buffer Memory | 512 Kbit | |||
| Flow Control | IEEE 802.3x flow control, back pressure flow control | |||
| Interface | ||||
| RJ-45 Ports | 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection | |||
| LED Indicators | Power, Link/Act, Power Device is detected | |||
| Ethernet Isolation | 1500 Vrms 1 minute | |||
| EMS Protection | Yes | |||
| Power Input | ||||
| Input Voltage Range | +46 ~ +55 VDC for PoE output | |||
| Power Consumption | 0.1 A @ 48 VDC without PD loading 2.8 A @ 48 VDC with PD full loading | 0.09 A @ 48 VDC without PD loading 1.45 A @ 48 VDC with PD full loading | ||
| Protection | Power reverse polarity protection | |||
| EMS Protection | Yes | |||
| Connection | 3-Pin Removable Terminal Block | |||
| PoE Technology | ||||
| PoE Compliance | 100% IEEE 802.3af compliant | |||
| PoE Classification | PSE (Power Sourcing Equipment) | |||
| PoE Voltage | +46 ~ +55 VDC depending on power input | |||
| PoE Power | Up to 15.4 watts per channel | |||
| PoE Operation | Automatic detection and power management | |||
| PoE Pin Assignments | V+ (Pin 1, 2), V- (Pin 3, 6) | |||
| PoE Disconnect Mode | DC disconnect | |||
| Mechanical | ||||
| Casing | Plastic (Flammability UL 94V-0) | Metal (IP30 Protection) | Plastic (Flammability UL 94V-0) | Metal (IP30 Protection) |
| Dimensions (W x L x H) | 31 mm x 157 mm x 113 mm | 25 mm x 168 mm x 119 mm | 31 mm x 157 mm x 113 mm | 25 mm x 168 mm x 119 mm |
| Installation | DIN-Rail Mounting | |||
| Environment | ||||
| Operating Temperature | -40 °C ~ +75 °C | |||
| Storage Temperature | -40 °C ~ +85 °C | |||
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing | |||
NS-205PF Series/NSM-205PF
NS-205PF Series/NSM-205PF Series คือ unmanaged switch POE 4 พอร์ต และ 1 พอร์ตไฟเบอร์ รองรับ 10/100 base-TX มาพร้อมกับฟังก์ชั่น Auto MDI/MDI-X สามารถจ่ายไฟได้สูงสุด 15.4w ต่อพอร์ต พอร์ตไฟเบอร์คุณภาพสูงป้องกันสัญญาณรบกวนและรองรับการส่งข้อมูลความเร็วสูง(100Mbps) สามารถส่งสัญญาณทางไกล(สูงสุด 60Km) สำหรับรุ่น NS-205PF-24V Series/NSM-205PF-24V Series สามารถรองรับไฟ 24Vdc ได้
Features
- Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
- Each port supports both 10/100 Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- 4 PoE ports with Power Sourcing Equipment (PSE) operation
- Automatic MDI/MDI-X crossover for plug-and-play
- Auto-detection of PD (powered devices) and automatic power management
- Over-temperature, over-current and over/under-voltage detection
- Supports operating temperatures from -30 ~ +75 °C
- DIN-Rail Mounting
Comparison table of 5-port 100 Base-FX Fiber Switch
| Models | NS-205PF-24V | NSM-205PF-24V | NS-205PF | NSM-205PF |
| PoE | 802.3af | |||
| Input Voltage Rangeg | +18 ~ 32 VDC | +46 ~ +55 VDC | ||
| Operating Temperature | -30 °C ~ +75 °C | |||
| Casing | Plastic | Metal (IP30) | Plastic | Metal (IP30) |
| Installation | DIN-Rail Mounting | |||
| Dimensions (W x H x D) (Unit: mm) | 31 x 157 x 113 | 25 x 168 x 119 | 31 x 157 x 113 | 25 x 168 x 119 |
Specifications
| Models | NS-205PF Series | NSM-205PF Series | NS-205PF-24V Series | NSM-205PF-24V Series | |
| Technology | |||||
| Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) | ||||
| Processing Type | Store & forward; wire speed switching | ||||
| MAC Addresses | 1024 | ||||
| Memory Bandwidth | 3.2 Gbps | ||||
| Frame Buffer Memory | 512 Kbit | ||||
| Flow Control | IEEE 802.3x flow control, back pressure flow control | ||||
| Ethernet Interface | |||||
| RJ-45 Ports | 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection | ||||
| LED Indicators | Power, Link/Act, Power Device is detected | ||||
| Ethernet Isolation | 1500 Vrms 1 minute | ||||
| +/-4 kV ESD Protection | Yes | ||||
| Fiber Interface (100 Base-FX; SC/ST type) | |||||
| Multi-Mode | NS-205PFT/FC NSM-205PFT/FC NS-205PFT-24V/FC-24V NSM-205PFT-24V/FC-24V | Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm Distance: 2 km, (62.5/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -20 dBm Max. TX Output: -14 dBm Max. RX Sensitivity: -32 dBm Min. RX Overload: -8 dBm Budget: 12 dBm | |||
| Single-Mode | NS-205PFCS NSM-205PFCS NS-205PFCS-24V/FCS-24V NSM-205PFCS-24V/FCS-24V | Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm Distance: 30 km, (9/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -15 dBm Max. TX Output: -8 dBm Max. RX Sensitivity: -34 dBm Min. RX Overload: -5 dBm Budget: 19 dBm | |||
| Single-Mode | NS-205PFCS-60 NSM-205PFCS-60 NS-205PFCS-60-24V/FCS-60-24V NSM-205PFCS-60-24V/FCS-60-24V | Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm Distance: 60 km, (9/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -5 dBm Max. TX Output: 0 dBm Max. RX Sensitivity: -35 dBm Min. RX Overload: -5 dBm Budget: 30 dBm | |||
| Power Input | |||||
| Input Voltage Range | +46 ~ +55 VDC for PoE output | +18 ~ +32 VDC | |||
| Power Consumption | 0.08 A @ 48 VDC without PD loading; 1.5 A @ 48 VDC with PD full loading | 0.24 A @ 24 VDC without PD loading; 3.2 A @ 24 VDC with PD full loading; 4.6 A @ 18 VDC with PD full loading | |||
| Protection | Power reverse polarity protection | ||||
| +/-4 kV ESD Protection | Yes | ||||
| Connector | 3-Pin Removable Terminal Block | ||||
| PoE Technology | |||||
| PoE Compliance | 100% IEEE 802.3af compliant | ||||
| PoE Classification | PSE (Power Sourcing Equipment) | ||||
| PoE Voltage | +48 VDC depending on power input | ||||
| PoE Voltage | Up to 15.4 watts per channel | ||||
| PoE Operation | Automatic detection and power management | ||||
| PoE Pin assignments | V+ (Pin 1,2), V- (Pin 3,6) | ||||
| PoE disconnect mode | DC disconnect | ||||
| Mechanical | |||||
| Casing | Plastic (Flammability UL 94V-0) | Metal (IP30 Protection) | Plastic (Flammability UL 94V-0) | Metal (IP30 Protection) | |
| Dimensions (W x L x H) (Unit: mm) | 31 x 157 x 113 | 25 x 168 x 119 | 31 x 157 x 113 | 25 x 168 x 119 | |
| Installation | DIN-Rail Mounting | ||||
| Environment | |||||
| Operating Temperature | -30 °C ~ +75 °C | ||||
| Storage Temperature | -40 °C ~ +85 °C | ||||
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing | ||||
EHG6308
Features
ประกอบด้วย EHG6308-4PoE และ EHG6308-4PoE-4SFP คือ Advanced unmanaged switch โลหะ ประกอบด้วย 4 พอร์ต Gigabit Ethernet 10/100/1000BASE-T(X) และ 4 พอร์ต POE Gigabit Ethernet 10/100/1000BASE-T(X),POE หรือ 4 พอร์ต Fiber 1000BASE,SFP ตามตารางแสดงด้านล่าง ถูกออกแบบมาเพื่อใช้ในระดับอุตสาหกรรม เหมาะกับการใช้งานในสภาพแวดล้อมที่เลวร้ายรุนแรง (-40 ~ 85°C) ได้รับมาตรฐาน IP50 มีการป้องกันเมื่อเกิด broadcast Storm สามารถรับไฟฟ้าได้สองทางเพื่อป้องกันการหยุดทำงานในกรณีที่แหล่งจ่ายไฟใดดับลง มีการแจ้งเตือนเมื่อไฟฟ้าขัดข้อง
- 8 x Gigabit Ethernet ports
- Up to 8 x 10/100/1000 Mbps Base-T(X) RJ45 Ethernet ports
- Up to 4 x 1000 Mbps BaseX SFP slots
- 4 x PoE P.S.E. Ports, supporting IEEE802.3af/IEEE 802.3at (PoE/PoE+)
- Up to 30 Watts for each PoE port, with a maximum 120W Power Budget
- Supports auto-negotiation and auto-MDI/MDI-X
- Supports store and forward transmission
- Supports flow control
- IP50 metal case
- DIN-Rail and wall mounting (Optional)
Specifications
| Ethernet | |
|---|---|
| Connector | RJ45 |
| Ports | 8 |
| Transmission Rate | 10/100/1000 Mbps |
| Standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T |
| Auto MDI/MDI-X | Yes |
| Ethernet | |
|---|---|
| Compliance | IEEE802.3af/IEEE 802.3at |
| Ports | 4 |
| Output | 30W |
| Type | P.S.E. |
| Power | |
|---|---|
| Connector | 5.08mm 7-pin Terminal Block |
| Input Voltage | 48-57 VDC |
| Input Current | 3.1A |
| Power Consumption | 148.8W max. |
| Reverse Polarity Protection | Yes |
| Redundancy | Yes |
| Physical Properties | |
|---|---|
| Housing | IP30 protection; metal housing |
| Installation | DIN Rail, Wall mount (optional) |
| Dimension (W x H x D) | 53.4 x 145.7 x 119.9 mm |
| Weight | 882g |
| Warranty | 5 years |
| Environmental Limits | |
|---|---|
| Operating Temperature | -10°C~70°C (14°~158°F) |
| Storage Temperature | -40°~85°C (-40°~185°F) |
| Ambient Relative Humidity | 5~95% RH (Non-condensing) |
EHG7305 / EHG7306 / EHG7307
Features
Advanced unmanaged switch PoE โลหะ ประกอบด้วย พอร์ต Gigabit Ethernet 10/100/1000BASE-T(X) และ พอร์ต POE Gigabit Ethernet 10/100/1000BASE-T(X) , POE หรือ พอร์ต Fiber 1000BASE,SFP ตามตารางแสดงด้านล่าง ถูกออกแบบมาเพื่อใช้ในระดับอุตสาหกรรม เหมาะกับการใช้งานในสภาพแวดล้อมที่เลวร้ายรุนแรง (-40 ~ 70°C) ได้รับมาตรฐาน IP30 และ EN60529 มีการป้องกันเมื่อเกิด broadcast Storm สามารถรับไฟฟ้าได้สองทางเพื่อป้องกันการหยุดทำงานในกรณีที่แหลงจ่ายไฟใดดับลง มีการแจ้งเตือนเมื่อไฟฟ้าขัดข้อง
- 5 x 10/100/1000 BASE-T(X) ports
- 2 x Gigabit SFP Uplink slots
- Up to 4 802.3af or 802.3at compliant PoE ports
- Support 10K Jumbo frames
- Supports 802.3az Energy Efficient Ethernet for power savings
- Works from -40°C~70°C
- Failed power input alarm contact
- Certified by CE/FCC UL 61010-2-201 and UL C1D2/ATEX Zone 2
- EN50155 and EN50121-4 certified for Railway and Trackside applications
Specifications
| Switch Properties | Value |
|---|---|
| Processing Scheme | Store-and-Forward |
| MAC Table Size | 8096 |
| Packet Buffer Size | 1Mb |
| Jumbo Frame | 10K Bytes |
| Ethernet | Standard | – |
|---|---|---|
| Standards | IEEE 802.3af / 802.3at for Power-over-Ethernet IEEE 802.3/802.3u for 10BASE-T/100BASE-T(X) IEEE 802.3ab for 1000BASE-T IEEE 802.3z for 1000BASE-X IEEE 802.3x for Flow Control IEEE 802.1d-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1q/p for VLAN Tagging and Class of Service IEEE 8021x for Authentication IEEE 802.3ad for Port Trunk with LACP IEEE 802.3az for Energy Efficient Ethernet | |
| Protocols | IPv4, IPv6, IGMPv1/v2/v3, IGMP Snooping, GARP, GMRP, GVRP, SNMPv1/v2c/v3, SNMP Inform, ICMP, Telnet, SSH, DHCP Relay/Client/IP-port-mapping, DHCP Option 66/67/82, BootP, RARP, TFTP, SMTP, SMTP (Gmail), RMON, HTTP, HTTPS, Syslog, MRP (Client) ,LLDP,802.1x,EAP,RADIUS,TACACS+,Mirror port, QoS, ACL, ITU-T G.8032 ERPS Ring, STP, RSTP, MSTP, Compatible Ring/ Chain, U-Ring | |
| Time Synchronization | Network Synchronization | NTP Server/Client, SNTP |
| Time Synchronization | Precision Network Synchronization | IEEE1588v1 OC/BC (Software) IEEE1588v2 TC (Hardware) – ns accuracy IEEE1588v2 OC/BC (Software) |
| Automation Profiles | Profinet v2.33 CC-B certified, Ethernet/IP, Modbus/TCP device status registers provided | |
| SNMP MIB | MIB II, IF-MIB, SNMPv2 MIB, BRIDGE-MIB, RMON MIB Group 1,2,3,9, RFC RFC 1157, RFC 1213, RFC 1215, RFC 1493, RFC 1643, RFC 1757, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2571, RFC 2742, RFC 2819, RFC 2863, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415 | |
| Power | |
|---|---|
| Input Voltage | 12-52VDC |
| Input Current (System) | 0.6A @ 12 V |
| Power Consumption (System) | 7.2 W |
| Input Current with PoE | 2.6A @ 51 V |
| Max. Power Consumption with PoE | 130 W |
| Relay Output | 24 V / 0.5A |
| Connector | Terminal block |
| Interfaces | |
|---|---|
| LED Indicators | PWR1, PWR2, Alarm, RJ45 Act/Link, SFP Link, PoE |
| Physical Characteristics | EHG7305 | EHG7305-4PoE | EHG7306-1SFP | EHG7306-4PoE-1SFP | EHG7307-2SFP | EHG7307-4PoE-2SFP |
|---|---|---|---|---|---|---|
| Housing | IP30 SECC housing | IP30 Aluminum housing | ||||
| Dimension (W x H x D) | 32 x 90 110 mm | 45.3 x 89.6 x 110 mm | ||||
| Weight | 420g | 350g | ||||
| Installation | DIN-Rail , Wall mount (optional kit) | |||||
| Environmental Limits | Value |
|---|---|
| Operating Temperature | -40°C~70°C (-40°F~158°F) |
| Storage Temperature | 40°C~85°C (-40°F~185°F) |
| Ambient Relative Humidity | 5%~95%, 55°C (Non-condensing) |